Product Specifications

Maintenance and adjustment of the quicksand board

1. After receiving the product, there is no need to adjust it, just turn it back and forth several times.

2. Due to temperature and pressure changes, sometimes you may need to adjust the air and water in the quicksand plate. The quicksand plate is equipped with an air conditioning device (injector).

3. Specific process: The art of quicksand is a natural balance between water, sand and air. The height of the air layer ranges from 0.5cm to 2cm depending on the size of the product. The sand will have good flow speed.

Solving sand flow velocity problems

If the sand is falling too slowly: pull out some air.

1. Each quicksand plate can be adjusted using an air conditioning device (syringe) to adjust the air and water inside the plate.

2. The air conditioner (syringe) can be inserted around the square sand plate, and the round sand plate will have a hole for adjustment.

3. Specific operation: Collect the bubbles together (for the circular sand plate, the bubbles must be collected at the hole) (to ensure that the sand moves away), then insert the air conditioning device (syringe) into the air hole to draw air.

If the sand is falling too fast: add some air.

1. In the same way as above, collect the bubbles together (for the circular sand plate, the bubbles must be collected at the hole) (to ensure that the sand can move), and then insert the air conditioner (syringe) into the air hole to inject air. If many small bubbles in the sand plate become a particularly large bubble, there are two solutions: 1. Shake the sand plate to make the large bubbles disperse and become small bubbles.

2. You can add some water moderately to compensate for the evaporation of water.

comments

1. When injecting water into the quicksand plates, pure water or boiling water must be used for cooling.

2. As shown above, draw some air and empty the air conditioner tube (syringe tube).

3. Use an air conditioning device (syringe) to pump and fill an appropriate amount of water to prevent overpressure and breakage of the glass (excess air can cause overpressure inside the sand plate, which may cause the glass to break, remember!).

Product Images

About the psychological benefits of the product

The moving sand board is an ideal tool for relaxation and rest. It helps relieve stress thanks to the slow and continuous movement of the sand, which gives a sense of calm and serenity. It can be used as a soothing decoration in offices or homes, as it helps improve mood and increase concentration.